In Figure 2 and Figure 3, added F-12191 and F-12192. Updated rivet lengths.
Added to Step 2: “Two of the hinge angles are used in the inboard hinge assembly as noted in Figure 1.”
Added Step 3: “Machine countersink the #40 holes in the F-12191. Dimple the #40 holes in the F-12191. Radius the forward edge of each F-12191 and F-12192 before riveting. Reference KAI 9iS/U-04, Figure 1.”
Resequenced remaining steps.
KAI Page 9iS/U-04 REV 1:
In Figure 1, added F-12191 and F-12192. Added arrow and note to fillet edge.