9_14 Elevator Assembly

KAI changes related to reflect SB-00043 elevator bonding

Changelog

• 09/06/2023
  • RV-14 KAI Page 09-01 REV 2: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-04 REV 1: E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-05 REV 1: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R
  • RV-14 KAI Page 09-06 REV 1: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-07 REV 1: E-00907-L-1 was E-00907-1L.
  • RV-14 KAI Page 09-08 REV 1: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-09 REV 2: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R
  • RV-14 KAI Page 09-10 REV 2: E-00907-L-1 was E-00907-1L
  • RV-14 KAI Page 09-11 REV 2: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R
  • RV-14 KAI Page 09-12 REV 3: E-00902-L-1 was E-00902-1L, E-00907-L-1 was E-00907-1L
  • RV-14 KAI Page 09-15 REV 2: Split Step 1 into multiple steps, added Step 3 for masking and scuffing the rear spar region. Added oval insert to Figure 1, and “SCUFF SKIN & SPAR AREA WITHIN ¼“ OF CORNER” annotation. E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-16 REV 1: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R
  • RV-14 KAI Page 09-17 REV 1: E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-18 REV 1: E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-19 REV 1: E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-20 REV 1: Steps 7, 8, 9, and 10, and Figures 3 and 4 are new. Previous Steps 7, 8, 9 and Figures 3 and 4 moved to Page 9-21. E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R. In Step 2, “Page 09-19 Figure 3” was, erroneously, “Figure 09-19 Figure 3”.
  • RV-14 KAI Page 09-21 REV 1: Content used to be Steps 7, 8, and 9 and Figure 3 on Page 09-20 Rev 0. E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R. In Figure 1, “FRONT SPAR” was, erroneously, “REAR SPAR”.
  • RV-14 KAI Page 09-22 REV 1: Content moved from Page 09-21 Rev 0. E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R.
  • RV-14 KAI Page 09-23 REV 1: Content moved from Page 09-22 Rev 0. Added new Step 2 and Step 7: Previous versions of the KAI failed to specify when / how / whether those holes should be riveted. E-00902-L-1 was E-00902-1L, E-00902-R-1 was E-00902-1R, E-00907-L-1 was E-00907-1L, E-00907-R-1 was E-00907-1R. In Figure 1, “E-903” was, erroneously, “E-1022”.
  • RV-14 KAI Page 09-24 REV 2: Content moved from Page 09-23 Rev 0. Step 5 is new. In Step 13, “Page 09-23” was “Page 09-22”. In Step 14, “Page 09-22” was “Page 09-21”.
  • RV-14 KAI Page 09-25 REV 1: Content moved from Page 09-24 Rev 1. E-00907-L-1 was E-00907-1L.
  • RV-14 KAI Page 09-26 REV 2: Content moved from Page 09-25 Rev 0. E-00902-L-1 was E-00902-1L.
  • RV-14 KAI Page 09-27 REV 1: Content moved from Page 09-26 Rev 0. On Figure 2, “Remove shaded portion from only two weights” was “Remove hatched areas”. Rewrote Step 3. On Step 4, “as shown in Figure 2” was, erroneously, “as shown in Figure 3”.