SB–00090
Directs all owners of aircraft equipped with a Dynon SV–AP–PANEL autopilot control panel to read and review the published Dynon service bulletin document.
Directs all owners of aircraft equipped with a Dynon SV–AP–PANEL autopilot control panel to read and review the published Dynon service bulletin document.
All RV Models except RV–12/12iS
All RV’s except RV–12/12iS
Directs owners/operators of Dynon Skyview–equipped aircraft with canopy–open warning features to update the Skyview settings files, available on the Van’s Aircraft website downloads page, for aircraft with EFIS systems that are updated to Skyview software v16.7 or later, to correct incorrect audible/visual warnings from being annunciated at incorrect RPM speeds.
REVISION DESCRIPTION / NEW DOCUMENTATION: Manual Section 5 -09 REV 4: Added the following text to the end of the section on dimpling: “Occasionally, a hole will crack when dimpled. This does not necessarily mean that the part must be scrapped. The criteria below provide guidance on how to evaluate cracks in dimple. Cracks […]
Discusses risks of vapor lock in high operating temperature environments and when using non–aviation fuels, as well as some information related to prevention and recognition of potential signs of vapor lock. Rev 1 updates scope of applicability to all RV aircraft running MOGAS.
Refers reader to the updated Laser–Cut Parts List as well as the Laser–Cut Parts Engineering Evaluation document; and addresses the use and inspection of these parts.
Advises owners to read the Airflow Systems service documentation, which directs inspection for possible leaks on a list of specific serial -number Airflow Systems 2006 X–Series oil coolers (Van’s part number EA–00002). Commonly installed as default equipment on the RV–14/14A but may have been installed on other RV models, as well. Rev 2 of […]
RV–3/4/6/7/8/9/10/14
Directs owners to inspect the RV–12iS radiator, attachment, and surrounding space; includes instructions to replace/modify the radiator mounting hardware. Revision 2 includes clarified steps and figures.
Describes the addition of a fitting to the top of the RV–12 fuel tank to allow for easier inspection of the fuel strainer. Revised 11/7/2023 to include the RV–12iS tank.
hero–simple text–with–sidebar order–links
[…] Via sat down with Marc Cook for an interview on Oshkosh Live Day 3. You can catch the conversation at the 1:49 mark in the video: Oshkosh LIVE 2024 Day 3 (Part 2). Thank you once again to everyone who helped make this year’s AirVenture a success. We look forward to seeing you next year!
[…] handle related emails and phone calls. We’re shipping kits to customers every day, and we’ve started sending replacement parts to some customers with kits that contained laser cut parts. We’re also currently finalizing the plan for customers who have open orders for Lycoming engines, Rotax powerplant kits, propellers, and avionics kits. Of note: The […]
Van’s Aircraft has partnered with Fuuz, an advanced cloud-based manufacturing solution. This marks a significant step in Van’s manufacturing modernization process, enhancing operational efficiency and growth. Fuuz will enable Van’s to transition from a patchwork of technologies, including a legacy enterprise resource planning (ERP) system with limited manufacturing functionality, to a unified approach involving […]
Update: June 17, 2024 Published: Laser Cut Parts Reference Library page Laser Cut Parts List updated to R8 (link) Reclassified some parts from “Replacement Recommended” to “Acceptable for Use” after further engineering review Update: January 8, 2024 Laser Cut Parts List updated to R7.2 (link) Clarifications of the parts classification Status Key (R7) […]
Describes inspection for potential elevator cracks and remediation on RV–10/RV–14, as well as preventative steps.
Optional RV–14 flap motor retrofit instructions for existing aircraft/kits
Describes amendments to the RV–12 and RV–12iS POH documents related to calibrated vs. indicated stall airspeeds
Specifies alternate engineering solutions for installation in RV–14/14A wing assemblies containing certain parts manufactured using laser–cutting process. Provides intervals for inspection and operation prior to solution installation.